Skip to content
Avatar of vercelvercel/nextjs-subscription-payments

Stripe Subscription Starter

The all-in-one subscription starter kit for high-performance SaaS applications, powered by Stripe, Supabase, and Vercel.

Subscription Payments Starter

Next.js Subscription Payments Starter

The all-in-one starter kit for high-performance SaaS applications.

Features

Demo

Architecture

Step-by-step setup

When deploying this template, the sequence of steps is important. Follow the steps below in order to get up and running.

Initiate Deployment

Vercel Deploy Button

The Vercel Deployment will create a new repository with this template on your GitHub account and guide you through a new Supabase project creation. The Supabase Vercel Deploy Integration will set up the necessary Supabase environment variables and run the SQL migrations to set up the Database schema on your account. You can inspect the created tables in your project's Table editor.

Should the automatic setup fail, please create a Supabase account, and a new project if needed. In your project, navigate to the SQL editor and select the "Stripe Subscriptions" starter template from the Quick start section.

Configure Auth

Follow this guide to set up an OAuth app with GitHub and configure Supabase to use it as an auth provider.

In your Supabase project, navigate to auth > URL configuration and set your main production URL (e.g. https://your-deployment-url.vercel.app) as the site url.

Next, in your Vercel deployment settings, add a new Production environment variable called NEXT_PUBLIC_SITE_URL and set it to the same URL. Make sure to deselect preview and development environments to make sure that preview branches and local development work correctly.

[Optional] - Set up redirect wildcards for deploy previews (not needed if you installed via the Deploy Button)

If you've deployed this template via the "Deploy to Vercel" button above, you can skip this step. The Supabase Vercel Integration will have set redirect wildcards for you. You can check this by going to your Supabase auth settings and you should see a list of redirects under "Redirect URLs".

Otherwise, for auth redirects (email confirmations, magic links, OAuth providers) to work correctly in deploy previews, navigate to the auth settings and add the following wildcard URL to "Redirect URLs": https://*-username.vercel.app/**. You can read more about redirect wildcard patterns in the docs.

If you've deployed this template via the "Deploy to Vercel" button above, you can skip this step. The Supabase Vercel Integration will have run database migrations for you. You can check this by going to the Table Editor for your Supabase project, and confirming there are tables with seed data.

Otherwise, navigate to the SQL Editor, paste the contents of the Supabase schema.sql file, and click RUN to initialize the database.

[Maybe Optional] - Set up Supabase environment variables (not needed if you installed via the Deploy Button)

If you've deployed this template via the "Deploy to Vercel" button above, you can skip this step. The Supabase Vercel Integration will have set your environment variables for you. You can check this by going to your Vercel project settings, and clicking on 'Environment variables', there will be a list of environment variables with the Supabase icon displayed next to them.

Otherwise navigate to the API settings and paste them into the Vercel deployment interface. Copy project API keys and paste into the NEXT_PUBLIC_SUPABASE_ANON_KEY and SUPABASE_SERVICE_ROLE_KEY fields, and copy the project URL and paste to Vercel as NEXT_PUBLIC_SUPABASE_URL.

Congrats, this completes the Supabase setup, almost there!

Configure Stripe

Next, we'll need to configure Stripe to handle test payments. If you don't already have a Stripe account, create one now.

For the following steps, make sure you have the "Test Mode" toggle switched on.

Create a webhook

We need to create a webhook in the Developers section of Stripe. Pictured in the architecture diagram above, this webhook is the piece that connects Stripe to your Vercel Serverless Functions.

  1. Click the "Add Endpoint" button on the test Endpoints page.
  2. Enter your production deployment URL followed by /api/webhooks for the endpoint URL. (e.g. https://your-deployment-url.vercel.app/api/webhooks)
  3. Click Select events under the Select events to listen to heading.
  4. Click Select all events in the Select events to send section.
  5. Copy Signing secret as we'll need that in the next step.
  6. In addition to the NEXT_PUBLIC_STRIPE_PUBLISHABLE_KEY and the STRIPE_SECRET_KEY we've set earlier during deployment, we need to add the webhook secret as STRIPE_WEBHOOK_SECRET env var.
Redeploy with new env vars

For the newly set environment variables to take effect and everything to work together correctly, we need to redeploy our app in Vercel. In your Vercel Dashboard, navigate to deployments, click the overflow menu button and select "Redeploy" (do NOT enable the "Use existing Build Cache" option). Once Vercel has rebuilt and redeployed your app, you're ready to set up your products and prices.

Create product and pricing information

Your application's webhook listens for product updates on Stripe and automatically propagates them to your Supabase database. So with your webhook listener running, you can now create your product and pricing information in the Stripe Dashboard.

Stripe Checkout currently supports pricing that bills a predefined amount at a specific interval. More complex plans (e.g., different pricing tiers or seats) are not yet supported.

For example, you can create business models with different pricing tiers, e.g.:

  • Product 1: Hobby
    • Price 1: 10 USD per month
    • Price 2: 100 USD per year
  • Product 2: Freelancer
    • Price 1: 20 USD per month
    • Price 2: 200 USD per year

Optionally, to speed up the setup, we have added a fixtures file to bootstrap test product and pricing data in your Stripe account. The Stripe CLI fixtures command executes a series of API requests defined in this JSON file. Simply run stripe fixtures fixtures/stripe-fixtures.json.

Important: Make sure that you've configured your Stripe webhook correctly and redeployed with all needed environment variables.

Configure the Stripe customer portal
  1. Set your custom branding in the settings
  2. Configure the Customer Portal settings
  3. Toggle on "Allow customers to update their payment methods"
  4. Toggle on "Allow customers to update subscriptions"
  5. Toggle on "Allow customers to cancel subscriptions"
  6. Add the products and prices that you want
  7. Set up the required business information and links

That's it

I know, that was quite a lot to get through, but it's worth it. You're now ready to earn recurring revenue from your customers. 🥳

Develop locally

If you haven't already done so, clone your Github repository to your local machine.

Next, use the Vercel CLI to link your project:

vercel login
vercel link

If you don't intend to use a local Supabase instance for development and testing, you can use the Vercel CLI to download the development env vars:

vercel env pull .env.local

Running this command will create a new .env.local file in your project folder. For security purposes, you will need to set the SUPABASE_SERVICE_ROLE_KEY manually from your Supabase dashboard (Settings > API). If you are not using a local Supabase instance, you should also change the --local flag to --remote in the supabase:generate-types script in package.json.

Local development with Supabase

It's highly recommended to use a local Supabase instance for development and testing. We have provided a set of custom commands for this in package.json.

First, you will need to install Docker. You should also copy .env.local.example to .env.local.

Next, run the following command to start a local Supabase instance and run the migrations to set up the database schema:

# or `npm` or `yarn` instead of `pnpm`
pnpm run supabase:start

The terminal output will provide you with values for the environment variables NEXT_PUBLIC_SUPABASE_URL, NEXT_PUBLIC_SUPABASE_ANON_KEY, and SUPABASE_SERVICE_ROLE_KEY. Copy these into your .env.local file.

The terminal output will also provide you with a URL to access the local Supabase Studio, where you can make changes to your local database instance. (You can always find the Supabase Studio later by opening up a Docker window, navigating to Containers tab, and clicking the link in the Ports column for the corresponding container.)

To link your local Supabase instance to your project, you will need to set SUPABASE_PROJECT_REF and SUPABASE_DB_PASSWORD for your remote database in your .env.local file. You can find these values in the Supabase dashboard for your project. Then, run the following command to link your local Supabase instance to your project:

pnpm run supabase:link

Once you've linked your project, you can make changes to the database schema in your local Supabase Studio and run the following command to generate TypeScript types to match your schema:

pnpm run supabase:generate-types

You can also automatically generate a migration file with all the changes you've made to your local database schema and then push the migration to your remote database with the following commands:

pnpm run supabase:generate-migration
pnpm run supabase:migrate

Remember to test your changes thoroughly in your local environment before deploying them to production!

Use the Stripe CLI to test webhooks

Install the Stripe CLI and link your Stripe account.

Next, start local webhook forwarding:

stripe listen --forward-to=localhost:3000/api/webhooks

Running this Stripe command will print a webhook secret (such as, whsec_***) to the console. Set STRIPE_WEBHOOK_SECRET to this value in your .env.local file. If you haven't already, you should also set NEXT_PUBLIC_STRIPE_PUBLISHABLE_KEY and STRIPE_SECRET_KEY in your .env.local file using the test mode(!) keys from your Stripe dashboard.

Install dependencies and run the Next.js client

In a separate terminal, run the following commands to install dependencies and start the development server:

pnpm install
pnpm run dev
# or
npm install
npm run dev
# or
yarn
yarn dev

Note that webhook forwarding and the development server must be running concurrently in two separate terminals for the application to work correctly.

Finally, navigate to http://localhost:3000 in your browser to see the application rendered.

Going live

Archive testing products

Archive all test mode Stripe products before going live. Before creating your live mode products, make sure to follow the steps below to set up your live mode env vars and webhooks.

Configure production environment variables

To run the project in live mode and process payments with Stripe, switch Stripe from "test mode" to "production mode." Your Stripe API keys will be different in production mode, and you will have to create a separate production mode webhook. Copy these values and paste them into Vercel, replacing the test mode values.

Redeploy

Afterward, you will need to rebuild your production deployment for the changes to take effect. Within your project Dashboard, navigate to the "Deployments" tab, select the most recent deployment, click the overflow menu button (next to the "Visit" button) and select "Redeploy" (do NOT enable the "Use existing Build Cache" option).

To verify you are running in production mode, test checking out with the Stripe test card. The test card should not work.

Subscription Payments Starter
Avatar of vercelvercel/nextjs-subscription-payments

Stripe Subscription Starter

The all-in-one subscription starter kit for high-performance SaaS applications, powered by Stripe, Supabase, and Vercel.

Next.js Subscription Payments Starter

The all-in-one starter kit for high-performance SaaS applications.

Features

Demo

Architecture

Step-by-step setup

When deploying this template, the sequence of steps is important. Follow the steps below in order to get up and running.

Initiate Deployment

Vercel Deploy Button

The Vercel Deployment will create a new repository with this template on your GitHub account and guide you through a new Supabase project creation. The Supabase Vercel Deploy Integration will set up the necessary Supabase environment variables and run the SQL migrations to set up the Database schema on your account. You can inspect the created tables in your project's Table editor.

Should the automatic setup fail, please create a Supabase account, and a new project if needed. In your project, navigate to the SQL editor and select the "Stripe Subscriptions" starter template from the Quick start section.

Configure Auth

Follow this guide to set up an OAuth app with GitHub and configure Supabase to use it as an auth provider.

In your Supabase project, navigate to auth > URL configuration and set your main production URL (e.g. https://your-deployment-url.vercel.app) as the site url.

Next, in your Vercel deployment settings, add a new Production environment variable called NEXT_PUBLIC_SITE_URL and set it to the same URL. Make sure to deselect preview and development environments to make sure that preview branches and local development work correctly.

[Optional] - Set up redirect wildcards for deploy previews (not needed if you installed via the Deploy Button)

If you've deployed this template via the "Deploy to Vercel" button above, you can skip this step. The Supabase Vercel Integration will have set redirect wildcards for you. You can check this by going to your Supabase auth settings and you should see a list of redirects under "Redirect URLs".

Otherwise, for auth redirects (email confirmations, magic links, OAuth providers) to work correctly in deploy previews, navigate to the auth settings and add the following wildcard URL to "Redirect URLs": https://*-username.vercel.app/**. You can read more about redirect wildcard patterns in the docs.

If you've deployed this template via the "Deploy to Vercel" button above, you can skip this step. The Supabase Vercel Integration will have run database migrations for you. You can check this by going to the Table Editor for your Supabase project, and confirming there are tables with seed data.

Otherwise, navigate to the SQL Editor, paste the contents of the Supabase schema.sql file, and click RUN to initialize the database.

[Maybe Optional] - Set up Supabase environment variables (not needed if you installed via the Deploy Button)

If you've deployed this template via the "Deploy to Vercel" button above, you can skip this step. The Supabase Vercel Integration will have set your environment variables for you. You can check this by going to your Vercel project settings, and clicking on 'Environment variables', there will be a list of environment variables with the Supabase icon displayed next to them.

Otherwise navigate to the API settings and paste them into the Vercel deployment interface. Copy project API keys and paste into the NEXT_PUBLIC_SUPABASE_ANON_KEY and SUPABASE_SERVICE_ROLE_KEY fields, and copy the project URL and paste to Vercel as NEXT_PUBLIC_SUPABASE_URL.

Congrats, this completes the Supabase setup, almost there!

Configure Stripe

Next, we'll need to configure Stripe to handle test payments. If you don't already have a Stripe account, create one now.

For the following steps, make sure you have the "Test Mode" toggle switched on.

Create a webhook

We need to create a webhook in the Developers section of Stripe. Pictured in the architecture diagram above, this webhook is the piece that connects Stripe to your Vercel Serverless Functions.

  1. Click the "Add Endpoint" button on the test Endpoints page.
  2. Enter your production deployment URL followed by /api/webhooks for the endpoint URL. (e.g. https://your-deployment-url.vercel.app/api/webhooks)
  3. Click Select events under the Select events to listen to heading.
  4. Click Select all events in the Select events to send section.
  5. Copy Signing secret as we'll need that in the next step.
  6. In addition to the NEXT_PUBLIC_STRIPE_PUBLISHABLE_KEY and the STRIPE_SECRET_KEY we've set earlier during deployment, we need to add the webhook secret as STRIPE_WEBHOOK_SECRET env var.
Redeploy with new env vars

For the newly set environment variables to take effect and everything to work together correctly, we need to redeploy our app in Vercel. In your Vercel Dashboard, navigate to deployments, click the overflow menu button and select "Redeploy" (do NOT enable the "Use existing Build Cache" option). Once Vercel has rebuilt and redeployed your app, you're ready to set up your products and prices.

Create product and pricing information

Your application's webhook listens for product updates on Stripe and automatically propagates them to your Supabase database. So with your webhook listener running, you can now create your product and pricing information in the Stripe Dashboard.

Stripe Checkout currently supports pricing that bills a predefined amount at a specific interval. More complex plans (e.g., different pricing tiers or seats) are not yet supported.

For example, you can create business models with different pricing tiers, e.g.:

  • Product 1: Hobby
    • Price 1: 10 USD per month
    • Price 2: 100 USD per year
  • Product 2: Freelancer
    • Price 1: 20 USD per month
    • Price 2: 200 USD per year

Optionally, to speed up the setup, we have added a fixtures file to bootstrap test product and pricing data in your Stripe account. The Stripe CLI fixtures command executes a series of API requests defined in this JSON file. Simply run stripe fixtures fixtures/stripe-fixtures.json.

Important: Make sure that you've configured your Stripe webhook correctly and redeployed with all needed environment variables.

Configure the Stripe customer portal
  1. Set your custom branding in the settings
  2. Configure the Customer Portal settings
  3. Toggle on "Allow customers to update their payment methods"
  4. Toggle on "Allow customers to update subscriptions"
  5. Toggle on "Allow customers to cancel subscriptions"
  6. Add the products and prices that you want
  7. Set up the required business information and links

That's it

I know, that was quite a lot to get through, but it's worth it. You're now ready to earn recurring revenue from your customers. 🥳

Develop locally

If you haven't already done so, clone your Github repository to your local machine.

Next, use the Vercel CLI to link your project:

vercel login
vercel link

If you don't intend to use a local Supabase instance for development and testing, you can use the Vercel CLI to download the development env vars:

vercel env pull .env.local

Running this command will create a new .env.local file in your project folder. For security purposes, you will need to set the SUPABASE_SERVICE_ROLE_KEY manually from your Supabase dashboard (Settings > API). If you are not using a local Supabase instance, you should also change the --local flag to --remote in the supabase:generate-types script in package.json.

Local development with Supabase

It's highly recommended to use a local Supabase instance for development and testing. We have provided a set of custom commands for this in package.json.

First, you will need to install Docker. You should also copy .env.local.example to .env.local.

Next, run the following command to start a local Supabase instance and run the migrations to set up the database schema:

# or `npm` or `yarn` instead of `pnpm`
pnpm run supabase:start

The terminal output will provide you with values for the environment variables NEXT_PUBLIC_SUPABASE_URL, NEXT_PUBLIC_SUPABASE_ANON_KEY, and SUPABASE_SERVICE_ROLE_KEY. Copy these into your .env.local file.

The terminal output will also provide you with a URL to access the local Supabase Studio, where you can make changes to your local database instance. (You can always find the Supabase Studio later by opening up a Docker window, navigating to Containers tab, and clicking the link in the Ports column for the corresponding container.)

To link your local Supabase instance to your project, you will need to set SUPABASE_PROJECT_REF and SUPABASE_DB_PASSWORD for your remote database in your .env.local file. You can find these values in the Supabase dashboard for your project. Then, run the following command to link your local Supabase instance to your project:

pnpm run supabase:link

Once you've linked your project, you can make changes to the database schema in your local Supabase Studio and run the following command to generate TypeScript types to match your schema:

pnpm run supabase:generate-types

You can also automatically generate a migration file with all the changes you've made to your local database schema and then push the migration to your remote database with the following commands:

pnpm run supabase:generate-migration
pnpm run supabase:migrate

Remember to test your changes thoroughly in your local environment before deploying them to production!

Use the Stripe CLI to test webhooks

Install the Stripe CLI and link your Stripe account.

Next, start local webhook forwarding:

stripe listen --forward-to=localhost:3000/api/webhooks

Running this Stripe command will print a webhook secret (such as, whsec_***) to the console. Set STRIPE_WEBHOOK_SECRET to this value in your .env.local file. If you haven't already, you should also set NEXT_PUBLIC_STRIPE_PUBLISHABLE_KEY and STRIPE_SECRET_KEY in your .env.local file using the test mode(!) keys from your Stripe dashboard.

Install dependencies and run the Next.js client

In a separate terminal, run the following commands to install dependencies and start the development server:

pnpm install
pnpm run dev
# or
npm install
npm run dev
# or
yarn
yarn dev

Note that webhook forwarding and the development server must be running concurrently in two separate terminals for the application to work correctly.

Finally, navigate to http://localhost:3000 in your browser to see the application rendered.

Going live

Archive testing products

Archive all test mode Stripe products before going live. Before creating your live mode products, make sure to follow the steps below to set up your live mode env vars and webhooks.

Configure production environment variables

To run the project in live mode and process payments with Stripe, switch Stripe from "test mode" to "production mode." Your Stripe API keys will be different in production mode, and you will have to create a separate production mode webhook. Copy these values and paste them into Vercel, replacing the test mode values.

Redeploy

Afterward, you will need to rebuild your production deployment for the changes to take effect. Within your project Dashboard, navigate to the "Deployments" tab, select the most recent deployment, click the overflow menu button (next to the "Visit" button) and select "Redeploy" (do NOT enable the "Use existing Build Cache" option).

To verify you are running in production mode, test checking out with the Stripe test card. The test card should not work.

Unleash New Possibilities

Deploy your app on Vercel and unlock its full potential